A. more
B. less
C. equal
D. none of the above
Related Mcqs:
- A butt weld is specified by__________________?
A. effective throat thickness
B. plate thickness
C. size of weld
D. penetration thickness - Minimum thickness of web in a plate girder, when the plate is accessible and also exposed to weather, is______________?
A. 5 mm
B. 6 mm
C. 8 mm
D. 10 mm - The effective length of a fillet weld should not be less than___________________?
A. two times the weld size
B. four times the weld size
C. six times the weld size
D. weld size - If the thickness of thinnest outside plate is 10 mm, then the maximum pitch of rivets in tension will be taken as______________?
A. 120 mm
B. 160 mm
C. 200 mm
D. 300 mm - If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be__________________?
A. 16 mm
B. 20 mm
C. 24 mm
D. 27 mm - The minimum thickness of a steel plate, which is directly exposed to weather and is not accessible for cleaning and repainting, should be___________________?
A. 4.5 mm
B. 6 mm
C. 8 mm
D. 10 mm - Bearing stiffener in a plate girder is used to__________________?
A. transfer the load from the top flange to the bottom one
B. prevent buckling of web
C. decrease the effective depth of web
D. prevent excessive deflection - Rivets connecting flange angles to cover plates in a plate girder are subjected to_________________?
A. horizontal shear only
B. vertical load only
C. both (A. and (B.
D. none of the above - The forces acting on the web splice of a plate girder are__________________?
A. axial forces
B. shear and axial forces
C. shear and bending forces
D. axial and bending forces - Economical depth of a plate girder corresponds to_________________?
A. minimum weight
B. minimum depth
C. maximum weight
D. minimum thickness of web
