A. 4.5 mm
B. 6 mm
C. 8 mm
D. 10 mm
Advertisement
Related Mcqs:
- Minimum thickness of web in a plate girder, when the plate is accessible and also exposed to weather, is______________?
- A. 5 mm B. 6 mm C. 8 mm D. 10 mm...
- The minimum thickness of plates in a steel stack should be___________________?
- A. 4 mm B. 5 mm C. 6 mm D. 8 mm...
- The actual thickness of butt weld as compared to the thickness of plate is usually________________?
- A. more B. less C. equal D. none of the above...
- If the thickness of thinnest outside plate is 10 mm, then the maximum pitch of rivets in tension will be taken as______________?
- A. 120 mm B. 160 mm C. 200 mm D. 300 mm...
- If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be__________________?
- A. 16 mm B. 20 mm C. 24 mm D. 27 mm...
- Minimum pitch provided in riveted steel tanks is________________?
- A. 1.5 d B. 2.0 d C. 2.5 d D. 3.0 d where d is diameter of rivets...
- The allowable tensile stress in structural mild steel plates for steel tank is assumed as________________?
- A. 95.0 MPa on net area B. 105.5 MPa on net area C. 105.5 MPa on gross area D. 150.0 MPa on gross area...
- In a gusseted base, when the end of the column is machined for complete bearing on the base plate, then the axial load is assumed to be transferred to base plate__________________?
- A. fully by direct bearing B. fully through fastenings C. 50% by direct bearing and 50% through fastenings D. 75% by direct bearing and 25% through fastenings...
- Rivets connecting flange angles to cover plates in a plate girder are subjected to_________________?
- A. horizontal shear only B. vertical load only C. both (A. and (B. D. none of the above...
- Intermediate vertical stiffeners in a plate girder need be provided if the depth of web exceeds___________________?
- A. 501 B. 851 C. 200 t D. 2501 where t is thickness of web...
Advertisement
