A. 5 mm
B. 6 mm
C. 8 mm
D. 10 mm
Advertisement
Related Mcqs:
- The minimum thickness of a steel plate, which is directly exposed to weather and is not accessible for cleaning and repainting, should be___________________?
- A. 4.5 mm B. 6 mm C. 8 mm D. 10 mm...
- Shear buckling of web in a plate girder is prevented by using________________?
- A. vertical intermediate stiffener B. horizontal stiffener at neutral axis C. bearing stiffener D. none of the above...
- The forces acting on the web splice of a plate girder are__________________?
- A. axial forces B. shear and axial forces C. shear and bending forces D. axial and bending forces...
- Intermediate vertical stiffeners in a plate girder need be provided if the depth of web exceeds___________________?
- A. 501 B. 851 C. 200 t D. 2501 where t is thickness of web...
- The actual thickness of butt weld as compared to the thickness of plate is usually________________?
- A. more B. less C. equal D. none of the above...
- Bearing stiffener in a plate girder is used to__________________?
- A. transfer the load from the top flange to the bottom one B. prevent buckling of web C. decrease the effective depth of web D. prevent excessive deflection...
- Rivets connecting flange angles to cover plates in a plate girder are subjected to_________________?
- A. horizontal shear only B. vertical load only C. both (A. and (B. D. none of the above...
- Horizontal stiffener in a plate girder is provided to safeguard against_______________?
- A. shear buckling of web plate B. compression buckling of web plate C. yielding D. all of the above...
- Economical depth of a plate girder corresponds to_________________?
- A. minimum weight B. minimum depth C. maximum weight D. minimum thickness of web...
- If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be__________________?
- A. 16 mm B. 20 mm C. 24 mm D. 27 mm...
Advertisement
