A. 0.1 to 0.2 mm
B. 0.2 to 0.4 mm
C. 0.45 to 0.6 mm
D. 0.6 to 0.8 mm
E. 0.8 to 1 mm
Related Mcqs:
- In order to prevent knock in the S.I. engines, the charge away from the spark plug should have___________________?
A. low temperature
B. low density
C. long ignition delay
D. rich mixture
E. all of the above - The ignition of charge by some hot surface in the engine cylinder before operation of spark plug is known as________________?
A. auto ignition
B. preignition
C. retarded ignition
D. accelerated ignition
E. detonation - In petrol engines, advancing the spark timing will_______________?
A. increase the knocking tendency
B. decrease the knocking tendency
C. not affect the knocking tendncy
D. increase or decrease knocking tendency depending on strenght and time of spark
E. unpredictable - With increase in engine speed, the ignition of spark in petrol engine has to be __________________?
A. Unaltered
B. Increased
C. Decreased
D. Advanced - In a cycle, the spark lasts roughly for ____________________?
A. 1 sec
B. 0.1 sec
C. 0.01 sec
D. 0.001 sec
E. 0.0001 sec - Kerosene is distilled at________________?
A. 30 – 65°C
B. 65 – 220°C
C. 220 – 350°C
D. 350 – 450°C
E. 450-550°C - Free air is the air at________________?
A. atmospheric conditions at any specific location
B. 20°C and 1 kg/cm2 and relative humidity of 36%
C. 0°C and standard atmospheric conditions
D. 15°C and 1 kg/cm2
E. 25°C, 1 kg/cm2 and relative humidity of 50%. - The fusible plug in small boilers is located ________________?
A. in the drum
B. in the fire tubes
C. above steam dome
D. over the combustion chamber
E. at the inlet of chimney - A fusible plug is fitted in small boilers in order to ___________________?
A. avoid excessive build up of pressure
B. avoid explosion
C. extinguish fire if water level in the boiler falls below alarming limit
D. control steam dome
E. remove molten aslj - Fusible plug for boilers is made of fusible metal containing tin, lead, and___________________?
A. bismuth
B. copper
C. aluminium
D. nickel
E. iron