A. in the drum
B. in the fire tubes
C. above steam dome
D. over the combustion chamber
E. at the inlet of chimney
Related Mcqs:
- Fusible plug for boilers is made of fusible metal containing tin, lead, and___________________?
A. bismuth
B. copper
C. aluminium
D. nickel
E. iron - A fusible plug is fitted in small boilers in order to ___________________?
A. avoid excessive build up of pressure
B. avoid explosion
C. extinguish fire if water level in the boiler falls below alarming limit
D. control steam dome
E. remove molten aslj - Duplex feed pumps are used in small steam boilers. These operate on the principle of_________________?
A. centrifugal pump
B. axial flow pump
C. gear pump
D. ejector pump
E. reciprocating pump - The diameter of tubes for natural circulation boiler as compared to controlled circulation boilers is___________________?
A. more
B. less
C. same
D. could be more or less depending on other factors
E. none of the above - The economizer is used in boilers to _______________________?
A. increase thermal efficiency of boiler
B. economise on fuel
C. extract heat from the exhaust flue gases
D. increase flue gas temperature
E. to heat feed water by bled steam - Fire tube boilers are limited to a maximum design working pressure of ____________________?
A. 1 kg/cm
B. 6 kg/cm
C. 17 kg/cm2
D. 100 kg/cm2
E. 250 kg/cm2 - The basic job of feed water treatment in boilers is to overcome the problem of __________________?
A. corrosion
B. scale
C. carryover
D. embrittlement
E. all of the above - Natural water circulation, by convection in water tube boilers, with increase in pressure of boiler _________________?
A. increases
B. decreases
C. remains unaffected
D. first increases and then decreases
E. first decreases and then increases - The function of injector used in small capacity boilers is to____________________?
A. create vacuum
B. inject chemical solution in feed pump
C. pump water, similar to boiler feed pump
D. add make up water in the system
E. none of the above - In which of the following boilers, the draught in furnace is increased by utilising exhaust steam from engine__________________?
A. lancashire boiler
B. locomotive boiler
C. babcock and wilcox boiler
D. cochran boiler
E. benson boiler
