A. formation of bainite structure
B. carburised structure
C. martenistic structure
D. lamellar layers of carbide distributed throughout the structure
E. relieving of stresses throughout a component
Related Mcqs:
- In mottled cast iron, carbon is available in__________________?
A. free form
B. combined form
C. nodular form
D. flat form
E. partly in free and partly in combined state - Addition of manganese to aluminium results in__________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Bin card is used in__________________?
A. administrative wing
B. workshop
C. foundry shop
D. stores
E. assembly shop - Froude number is significant in__________________?
A. supersonics, as with projectile and jet propulsion
B. full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc.
C. simultaneous motion through two fluids where there is a surface of dis-continuity, gravity forces, and wave making effect, as with ship’s hulls
D. all of the above
E. none of the above - Induction hardening is the process of_____________________?
A. hardening surface of workpiece to ob-tain hard and wear resistant surface
B. heating and cooling rapidly
C. increasing hardness throughout
D. inducing hardness by continuous process
E. hardening core - Materials after cold working are subjected to following process to relieve stresses__________________?
A. hot working
B. tempering
C. normalising
D. annealing
E. special heat treatment - Cyaniding is the process of________________?
A. dipping steel in cyanide bath
B. reacting steel surface with cyanide salts
C. adding carbon and nitrogen by heat treatment of steel to increase its surface hardness
D. obtaining cyanide salts
E. making corrosion resistant steel - Carbonation of coal is the process of________________________?
A. pulverising coal in inert atmosphere
B. heating wood in a limited supply of air at temperatures below 300°C
C. strongly heating coal continuously for about 48 hours in the absence of air in a closed vessel
D. binding the pulverised coal into brick-ettes
E. enriching carbon in the coal - On Mollier chart, free expansion, or throttling process from high pressure to atmosphere is represented by_______________?
A. horizontal straight line
B. vertical straight line
C. straight inclined line
D. curved line
E. none of the above - Adiabatic process is________________?
A. essentially an isentropic process
B. non-heat transfer process
C. reversible process
D. constant temperature process
E. constant enthalpy process