A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above
Related Mcqs:
- Aluminium bronze contains aluminium and copper in the ratio of___________________?
A. 50 : 50
B. 40 : 60
C. 60 : 40
D. 10 : 90
E. 90 : 10 - Addition of silicon to aluminium results in____________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Addition of lead and bismuth to aluminium results in_________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Addition of copper to aluminium results in_____________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - A specimen of aluminium metal when observed under microscope shows __________________?
A. B.C.C. crystalline structure
B. F.C.C. crystal structure
C. H.C.P. structure
D. a complex cubic structure
E. orthorhombic crystalline structure - Alnico, an alloy used extensively for permanent magnets contains iron, nickel, aluminium and cobalt in the following ratio _____________________?
A. 50 : 20 : 20 : 10
B. 40 : 30 : 20 : 10
C. 50 : 20 : 10 : 20
D. 30 : 20 : 30 : 20
E. 50 : 10 : 20 : 20 - Which is false statement about properties of aluminium ___________________?
A. modulus of elasticity is fairly low
B. wear resistance is very good
C. fatigue strength is not high
D. creep strength limits its use to fairly low temperatures
E. corrosion resistance is good - Aluminium bronze contains__________________?
A. 94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe
B. 92.5% aluminium, 4% copper, 2% nickel, and 1.5% Mg
C. 10% aluminium and 90% copper
D. 90% magnesium and 9% aluminium with some copper
E. 10% aluminium and 90% tin - Process of austempering results in__________________?
A. formation of bainite structure
B. carburised structure
C. martenistic structure
D. lamellar layers of carbide distributed throughout the structure
E. relieving of stresses throughout a component - In mottled cast iron, carbon is available in__________________?
A. free form
B. combined form
C. nodular form
D. flat form
E. partly in free and partly in combined state
