A. high burning rate is possible
B. heat release can be easily controlled
C. fuel burns economically
D. it is the best technique for burning high ash content fuel having low fusion ash
E. separate mills are required to powder the coal
Related Mcqs:
- Which is correct statement about reaction time for autoignition of fuel and the fuel air ratio__________________?
A. lean mixture has high reaction time
B. rich mixture has high reaction time
C. chemically correct mixture has mini-mum reaction time
D. all of the above
E. non of the above - The size of a boiler drum in pulverised fuel fired boiler,as its size and capacity, (steam pressure and flow ratings) increase __________________?
A. increases
B. decreases
C. remains unchanged
D. increases/decreases depending on steam temperature requirements
E. unpredictable - The specific fuel consumption for a petrol engine first decreases with increase in fuel air ratio and then increases with further increase in fuel air ratio. The minimum value occurs in the range of__________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Heating value of fuel used is as on fired basis. If it is reported for dry or moisture free fuel, then latter should be multiplied by the following factor to correct for as fired value ___________________?
A. (1- moisture content)
B. (1 + moisture content)
C. 1 + moisture content
D. 1 – moisture content - Which is not correct statement about effect of sulphur in fuel ___________________?
A. it has heating value
B. it helps in electrostatic precipitation of ash in flue-gases
C. it leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low
D. it erodes furnace walls
E. none of the above - Auto-ignition reaction time for petrol engine first decreases with increase in fuel air ratio, reaches a minimum value and then increases with subsequent increase in fuel air ratio. The minimum value occurs in the region of________________?
A. Lean mixture
B. Chemically correct fuel air ratio
C. Rich mixture
D. Unpredictable - The m.e.p. of a petrol engine first increases as the fuel air ratio is increased and then decreases on further increase in fuel air ratio. The M.E.P is maximum in the zone of________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - A packaged boiler is one in which various parts like firing equipment, fans, feed pumps and automatic controls are________________?
A. supplied by same manufacturer loose and assembled at site
B. supplied mounted on a single base
C. purchased from several parties and packed together at site
D. packaged boiler does not exist
E. none of the above - The firing order in a six stroke I.C. engine is_________________?
A. 1-3-6-5-2-4
B. 1-4-2-5-6-3
C. 1-6-2-5-4-3
D. 1-5-2-6-3-4
E. 1-5-3-4-2-6 - The most popular firing order in case of four cylinder in-line I.C. engine is__________________?
A. 1-2-3-4
B. 1-3-2-4
C. 1-4-2-3
D. 1-2-4-3
E. 1-3-4-
