A. using additives in the fuel
B. engine derating i.e. reducing the maxi-mum flow of fuel
C. increasing the compression ratio
D. adherence to proper fuel specification
E. avoidance of overloading
Related Mcqs:
- In diesel engine the diesel fuel injected into cylinder would burn instantly at about compressed air temperature of____________________?
A. 250°C
B. 500°C
C. 1000°C
D. 150CPC
E. 2000°C - High carbon content in diesel oil used for diesel engine leads to_________________?
A. production of highly corrosive gases corroding the cylinder walls and exhaust system
B. excessive engine wear
C. damaging of both the storage tank and the engine
D. deposition on engine parts
E. none of the above. - Diesel engines have low specific fuel consumption compared to petrol engine. This statement is____________________?
A. not true
B. true at full load
C. true at part load
D. true at both part and full load
E. there could not be any such criterion - Pick up the false statement ?
A. Thermal efficiency of diesel engine i about 34%
B. Theoretically correct mixture of air am petrol is approximately 15 : 1
C. High speed compression engines operate on dual combustion cycle
D. Diesel engines are compression ignition engines
E. S.I. engines are quality-governed engines - Which is false statement about advantages of V-type engine_________________?
A. compact design requiring lesser space
B. improved distribution of air to cylinder
C. casting less liable to distortion
D. reduced torsional vibration because of shorter crankshaft
E. less overhead clearance - Pick up false statement?
A. For petrol and large gas engines, quantity governingds preferred
B. In quantity governing, air fuel ratio is almost constant and quantity of charge is changed depending on load
C. In hit and miss governing, fuel supply is completely cut off during one or more number of cycles
D. In quality governing, quantity of fuel is varied to suit the load and total charge of air is varied
E. For close regulation of speed, combination of both quality and quantity governing is used - Which of the following medium is compressed in a Diesel engine cylinder __________________?
A. air aione
B. air and fuel
C. air and lub oil
D. fuel alone
E. air, fuel and lub oil - The output of a diesel engine can be increased without increasing the engine revolution or size in following way_________________?
A. feeding more fuel
B. increasing flywheel size
C. heating incoming air
D. scavenging
E. supercharging - Installation of supercharger on a four-cycle diesel engine can result in the following percentage increase in power_____________?
A. upto 25%
B. upto 35%
C. upto 50%
D. upto 75%
E. upto 100%. - Cetane number is determined by comparing the performance of diesel oil with the following hydrocarbons___________________?
A. cetane
B. mixture of cetane and alphamethyl napthalene
C. ethylene dibromide
D. mixture of aldehydes and ketones
E. mixture of cetane with tetra-ethyl lead
