A. 0.2%
B. 0.5%
C. 0.8%
D. 1.0%
E. 1.5%.
Related Mcqs:
- A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will_________________?
A. increase
B. decrease
C. remain same
D. increase/decrease depending on depth of immersion
E. unpredictable - Drop forging dies contain carbon of the order of_________________?
A. 0.1 to 0.2%
B. 0.25 to 0.5%
C. 0.6 to 0.7%
D. 0.7 to 0.9%
E. 1.0 to 1.2%. - Cold rolled steel sheets contain carbon of the following order___________________?
A. 0.1%
B. 0.2%
C. 0.4%
D. 0.6%
E. 0.8% - Large forgings, crank shafts, axles normally contain carbon up to________________?
A. 0.05 to 0.20%
B. 0.20 to 0.45%
C. 0.45 to 0.55%
D. 0.55 to 1.0%
E. 1.0 to 1.2%. - The percentage of carbon in low carbon steel is__________________?
A. 0.05%
B. 0.15%
C. 0.3%
D. 0.5%
E. 0.7%. - High carbon steel carries carbon %age c_________________?
A. 0.1 to 0.3%
B. 0.3 to 0.6%
C. 0.6 to 0.8%
D. 0.8 to 1.5%
E. 1.5 to 2.5%. - The ignition coil in diesel engines produces voltage of the order of________________?
A. 6 to 12 volts
B. 240 volts
C. 1000 volts
D. 20,000 volts
E. 80,000 volts - In order to prevent formation of carbon on the injector, the temperature of nozzle tip should be__________________?
A. less than 100°C
B. between 100-250°C
C. between 250 – 300°C
D. between 400 – 500°C
E. between 500 – 1000°C - An object having 10 kg mass weighs 9.81kg on a spring balance. The value of ‘g’ at this place is _________________?
A. 10m/sec2
B. 9.81 m/sec2
C. 10.2/m sec
D. 9.75 m/sec2
E. 9 m/sec - Which of the following alloys does not contain tin_________________?
A. white metal
B. solder admiralty
C. fusible metal
D. phosphor bronze
E. gun metal