A. 0.1 to 0.2%
B. 0.25 to 0.5%
C. 0.6 to 0.7%
D. 0.7 to 0.9%
E. 1.0 to 1.2%.
Related Mcqs:
- Taps, dies and drills contain carbon________________?
A. below 0.5%
B. below 1%
C. above 1%
D. above 2.2%
E. nil - Heavy duty leaf and coil spring* contain carbon of the following order ________________?
A. 0.2%
B. 0.5%
C. 0.8%
D. 1.0%
E. 1.5%. - Cold rolled steel sheets contain carbon of the following order___________________?
A. 0.1%
B. 0.2%
C. 0.4%
D. 0.6%
E. 0.8% - Large forgings, crank shafts, axles normally contain carbon up to________________?
A. 0.05 to 0.20%
B. 0.20 to 0.45%
C. 0.45 to 0.55%
D. 0.55 to 1.0%
E. 1.0 to 1.2%. - The percentage of carbon in low carbon steel is__________________?
A. 0.05%
B. 0.15%
C. 0.3%
D. 0.5%
E. 0.7%. - High carbon steel carries carbon %age c_________________?
A. 0.1 to 0.3%
B. 0.3 to 0.6%
C. 0.6 to 0.8%
D. 0.8 to 1.5%
E. 1.5 to 2.5%. - The efficiency of I.C. engines normally is of the order of_________________?
A. 15-20%
B. 20-25%
C. 25-30%
D. 30-35%
E. 35-50% - The thermal efficiency of a diesel engine is of the order of_________________?
A. 92%
B. 68%
C. 52%
D. 34%
E. 25%. - In order to prevent formation of carbon on the injector, the temperature of nozzle tip should be__________________?
A. less than 100°C
B. between 100-250°C
C. between 250 – 300°C
D. between 400 – 500°C
E. between 500 – 1000°C - Which of the following alloys does not contain tin_________________?
A. white metal
B. solder admiralty
C. fusible metal
D. phosphor bronze
E. gun metal
Advertisement