A. 94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe
B. 92.5% aluminium, 4% copper, 2% nickel, and 1.5% Mg
C. 10% aluminium and 90% copper
D. 90% magnesium and 9% aluminium with some copper
E. 10% aluminium and 90% tin
Related Mcqs:
- Aluminium bronze contains aluminium and copper in the ratio of___________________?
A. 50 : 50
B. 40 : 60
C. 60 : 40
D. 10 : 90
E. 90 : 10 - Gun metal contains__________________?
A. 70% copper and 30% zinc
B. 90% copper and 10% tin
C. 85-92% copper and rest tin with little lead and nickel
D. 70-78% copper and rest tin
E. 85-92% copper and rest zinc - Admiralty gun metal contains__________________?
A. 63 to 67% nickel and 30% copper
B. 88% copper, 10% tin and rest zinc
C. alloy of tin, lead and cadmium
D. iron scrap and zinc
E. none of the above - White metal contains__________________?
A. 63 to 67% nickel and 30% copper
B. 88% copper and 10% tin and rest zinc
C. alloy of tin, lead and cadmium
D. silver and chromium
E. malleable cast iron and silver - Bronze contains_____________________?
A. 70% copper and 30% zinc
B. 90% copper and 10% tin
C. 85-92% copper and rest tin with little lead and nickel
D. 70-75% copper and rest tin
E. 90% copper and 10% zinc - Phosphor bronze contains____________________?
A. 0.5% of phosphorous
B. 1% phosphorous
C. 2.5% phosphorous
D. 5% phosphorous
E. none of the above - Alnico, an alloy used extensively for permanent magnets contains iron, nickel, aluminium and cobalt in the following ratio _____________________?
A. 50 : 20 : 20 : 10
B. 40 : 30 : 20 : 10
C. 50 : 20 : 10 : 20
D. 30 : 20 : 30 : 20
E. 50 : 10 : 20 : 20 - Which is false statement about properties of aluminium ___________________?
A. modulus of elasticity is fairly low
B. wear resistance is very good
C. fatigue strength is not high
D. creep strength limits its use to fairly low temperatures
E. corrosion resistance is good - Addition of lead and bismuth to aluminium results in_________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - Addition of copper to aluminium results in_____________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above
