A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 100,000 litres/sqm/day
Related Mcqs:
- The normal values of over flow rates for secondary sedimentation tanks, ranges between__________________?
A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 10,000 litres/sqm/day - The normal values of over flow rates for sedimentation tanks using coagulant, ranges between__________________?
A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 100,000 litres/sqm/day - The detention period for plain sedimentation water tanks, is usually____________________?
A. 4 to 8 hours
B. 8 to 16 hours
C. 16 to 24 hours
D. 24 to 36 hours - The maximum depth of sedimentation tanks, is kept__________________?
A. 3 m
B. 3.5 m
C. 4 m
D. 4.5 m - In primary sedimentation, the 0.2 mm inorganic solids get separated if specific gravity is_________________?
A. 2.25
B. 2.50
C. 2.55
D. 2.65 - For a continuous flow type of sedimentation tanks__________________?
A. Width of the tank is normally kept about 6 m
B. Length of the tank is normally kept 4 to 5 times the width
C. Maximum horizontal flow velocity is limited to 0.3 m/minute
D. All the above - The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is_____________________?
A. 204 cu.m
B. 208 cu.m
C. 212 cu.m
D. 216 cu.m - The flow velocity in detritus tanks is________________?
A. 0.05 m/sec
B. 0.09 m/sec
C. 1.25 m/sec
D. None of these - Newton’s law of viscosity is a relationship between________________?
A. shear stress anctthejiate of angular distortion
B. shear stress and viscosity
C. shear stress, velocity and viscosity
D. pressure, velocity and viscosity
E. shear stress, pressure and rate of angular distortion - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow
