A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 100,000 litres/sqm/day
Related Mcqs:
- The normal values of over flow rates for secondary sedimentation tanks, ranges between__________________?
A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 10,000 litres/sqm/day - The normal value of over flow rates for plain primary sedimentation tanks, ranges between________________?
A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 100,000 litres/sqm/day - The detention period for plain sedimentation water tanks, is usually____________________?
A. 4 to 8 hours
B. 8 to 16 hours
C. 16 to 24 hours
D. 24 to 36 hours - The maximum depth of sedimentation tanks, is kept__________________?
A. 3 m
B. 3.5 m
C. 4 m
D. 4.5 m - For a continuous flow type of sedimentation tanks__________________?
A. Width of the tank is normally kept about 6 m
B. Length of the tank is normally kept 4 to 5 times the width
C. Maximum horizontal flow velocity is limited to 0.3 m/minute
D. All the above - The dimensions of a rectangular settling tank are: length 24 m, width 6 m and depth 3 m. If 2 hour detention period for tanks is recommended, the rate of flow of sewage per hour, is_____________________?
A. 204 cu.m
B. 208 cu.m
C. 212 cu.m
D. 216 cu.m - The flow velocity in detritus tanks is________________?
A. 0.05 m/sec
B. 0.09 m/sec
C. 1.25 m/sec
D. None of these - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow - The coagulant which is generally not used for treating the sewage, is__________________?
A. Alum
B. Ferric chloride
C. Ferric sulphate
D. Chlorinated copperas - The coagulant widely used for sewage treatment, is_________________?
A. Alum
B. Ferric chloride
C. Ferric sulphate
D. Chlorinated copperas
