A. shear stress anctthejiate of angular distortion
B. shear stress and viscosity
C. shear stress, velocity and viscosity
D. pressure, velocity and viscosity
E. shear stress, pressure and rate of angular distortion
Related Mcqs:
- The normal value of over flow rates for plain primary sedimentation tanks, ranges between________________?
A. 25,000 to 35,000 litres/sqm/day
B. 40,000 to 50,000 litres/sqm/day
C. 50,000 to 60,000 litres/sqm/day
D. 80,000 to 100,000 litres/sqm/day - For very great pressures, viscosity of moss gases and liquids __________________?
A. remains same
B. increases
C. decreases
D. shows erratic behaviour
E. none of the above. - Viscosity of water in comparison to mercury is ______________________?
A. higher
B. lower
C. same
D. higher/lower depending on temperature
E. unpredictable. - The ratio of absolute viscosity to mass density is known as____________________?
A. specific viscosity
B. viscosity index
C. kinematic viscosity
D. coefficient of viscosity
E. coefficient of compressibility - Which of the following is the unit of kinematic viscosity _________________?
A. pascal
B. poise
C. stoke
D. faraday
E. none of the above - Kinematic viscosity is dependent upon________________?
A. pressure
B. distance
C. level
D. flow
E. density - The units of kinematic viscosity are_______________?
A. metres2 per sec
B. kg sec/meter
C. newton-sec per meter
D. newton-sec per meter
E. none of the above - 4-61. Kinematic viscosity is equal to________________?
A. dynamic viscosity/density
B. dynamicviscosity x density
C. density/dynamic viscosity
D. 1/dynamicviscosity x density
E. same as dynamic viscosity - The units of dynamic or absolute viscosity are_______________?
A. metres2 per sec
B. kg sec/meter
C. newton-sec per meter
D. newton-sec2 per meter
E. none of the above - Dynamic viscosity of most of the liquids with rise in temperature____________________?
A. increases
B. decreases
A. remains unaffected
D. unpredictable
E. none of the above
