A. annual average hourly volume
B. annual average daily traffic
C. thirtieth highest hourly volume
D. peak hourly volume of the year
Related Mcqs:
- The sequence of four stages of survey in a highway alignment is______________?
A. reconnaissance, map study, preliminary survey and detailed survey
B. map study, preliminary survey, reconnaissance and detailed survey
C. map study, reconnaissance, preliminary survey and detailed survey
D. preliminary survey, map study, reconnaissance and detailed survey - The ruling design speed on a National Highway in plain terrain as per IRC recommendations is_____________?
A. 60 kmph
B. 80 kmph
C. 100 kmph
D. 120 kmph - For highway geometric design purposes the speed used is________________?
A. 15th percentile
B. 50 “”percentile
C. 85th percentile
D. 98 “”percentile - Most suitable material for highway embankments is______________?
A. granular soil
B. organic soil
C. silts
D. clays - In highway construction, rolling starts from________________?
A. sides and proceed to centre
B. centre and proceed to sides
C. one side and proceed to other side
D. any of the above - In highway construction on super elevated curves, the rolling shall proceed from_________________?
A. sides towards the centre
B. centre towards the sides
C. lower edge towards the upper edge
D. upper edge towards the lower edge - Scientific planning of transportation system and mass transit facilities in cities should be based on_____________?
A. spot speed data
B. origin and destination data
C. traffic volume data
D. accident data - The number of repetitions, which the pavement thickness designed for a given wheel load should be able to support during the life of pavement is______________?
A. 1000
B. 10000
C. 100000
D. 1000000 - The absolute minimum radius of curve for safe operation for a speed of 110 kmph is______________?
A. 110 m
B. 220 m
C. 440 m
D. 577 m - In soils having same values of plasticity index, if liquid limit is increased, then_____________?
A. compressibility and permeability decrease and dry strength increases
B. compressibility, permeability and dry strength decrease
C. compressibility, permeability and dry strength increase
D. compressibility and permeability increase and dry strength decreases
