According to Indian Standards Institute, the actual size of modular bricks is_______________?

Related Mcqs:

1. As per Indian Standard Specifications, the peak discharge for domestic purposes per capita per minute, is taken________________?

   A. 1.80 litres for 5 to 10 users
   B. 1.20 litres for 15 users
   C. 1.35 for 20 users
   D. All the above

2. The cost of the earthwork in excavation for the surface drain of cross-section shown in the given figure for a total length of 5 metres @ Rs. 450% cum, is_______________?

   A. Rs. 400
   B. Rs. 425
   C. Rs. 450
   D. Rs. 500

3. The expected out turn of 12 mm plastering with cement mortar is_______________?

   A. 2.5 sq m
   B. 4.0 sq m
   C. 6.0 sq m
   D. 8.0 sq m

4. The expected out turn for earth work in excavation in ordinary soil per workman per day is_______________?

   A. 1.00 cum
   B. 2.00 cum
   C. 3.00 cum
   D. 4.00 cum

5. For 100 sq. m cement concrete (1 : 2: 4) 4 cm thick floor, the quantity of cement required, is_______________?

   A. 0.90 m3
   B. 0.94 m3
   C. 0.98 m3
   D. 1.00 m3

6. According to ISI method of measurement, the order of the sequence is_________________?

   A. Length, breadth, height
   B. Breadth, length, height
   C. Height, length, breadth
   D. None of these

7. While estimating the qualities for the construction of a building, the correct metric unit is________________?

   A. Metre for length
   B. Cubic metre for area
   C. Square metres for volume
   D. Litre for capacity

8. The cross -section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is__________________?

   A. b – rd)²/(r – s)
   B. b – rd)²/(r + s)
   C. ½ × (b + rd)²/(r – s)
   D. b – rd)²/(s – r)

9. The ‘centre line method’ is specially adopted for estimating_________________?

   A. Circular buildings
   B. Hexagonal buildings
   C. Octagonal buildings
   D. All the above

10. Pick up the correct statement from the following?

    A. All pipes and fittings are classified according to their diameters
    B. The diameter of the pipes is the nominal diameter of internal bore
    C. All pipes are measured along the centre line of the pipes in metres
    D. All the above