A. Shear force/(Lever arm × Width)
B. Lever arm/(Shear force × Width)
C. Width/(Lever arm × Shear force)
D. (Shear force × Width)/Lever arm
Related Mcqs:
- A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?
A. 30
B. 35
C. 40
D. 45 - The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
A. Is safe in shear
B. Is unsafe in shear
C. Is over safe in shear
D. Needs redesigning - In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called________________?
A. Under-reinforced section
B. Over reinforced section
C. Economic section
D. Critical section - If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?
A. 8 cm
B. 6 m
C. 8 m
D. 10 m - The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is_______________?
A. 1400 kg/cm2
B. 190 kg/cm2
C. 260 kg/cm2
D. 230 kg/cm2 - is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?
A. f = (P/A) + (Z/M)
B. f = (A/P) + (M/Z)
C. f = (P/A) + (M/Z)
D. f = (P/A) + (M/6Z) - An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is_______________?
A. 8.3 kg/cm2
B. 7.6 kg/cm2
C. 21.5 kg/cm 2
D. 11.4 kg/cm2 - The maximum shear stress (qmax) in a rectangular beam is_______________?
A. 1.25 times the average
B. 1.50 times the average
C. 1.75 times the average
D. 2.0 times the average - If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance from either end where, is________________?
A. 50 cm
B. 100 cm
C. 150 cm
D. 200 cm
