A. 8.3 kg/cm2
B. 7.6 kg/cm2
C. 21.5 kg/cm 2
D. 11.4 kg/cm2
Related Mcqs:
- An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000 kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is__________________?
A. Safe in shear
B. Is safe with stirrups
C. Is safe with stirrups and inclined members
D. Needs revision of the section - A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?
A. 30
B. 35
C. 40
D. 45 - A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?
A. 14 cm 2
B. 15 cm2
C. 16 cm2
D. 17 cm2 - An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam________________?
A. Is safe in shear
B. Is safe with stirrups
C. Is safe with stirrups and inclined bars
D. Needs revision of section - The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
A. Is safe in shear
B. Is unsafe in shear
C. Is over safe in shear
D. Needs redesigning - An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is__________________?
A. 300 cm
B. 233 cm
C. 176 cm
D. 236 cm - effective depth and depth of the neutral axis respectively of a singly reinforced If d and n are the beam, the lever arm of the beam, is_________________?
A. d
B. n
C. d + n/3
D. d – n/3 - Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to__________________?
A. Shear force
B. Area of the section
C. Distance of the C.G. of the area from its neutral axis
D. Moment of the beam section about its neutral axis - If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?
A. 8 cm
B. 6 m
C. 8 m
D. 10 m - is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?
A. f = (P/A) + (Z/M)
B. f = (A/P) + (M/Z)
C. f = (P/A) + (M/Z)
D. f = (P/A) + (M/6Z)
