A. 1.25 times the average
B. 1.50 times the average
C. 1.75 times the average
D. 2.0 times the average
Related Mcqs:
- is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is_________________?
A. f = (P/A) + (Z/M)
B. f = (A/P) + (M/Z)
C. f = (P/A) + (M/Z)
D. f = (P/A) + (M/6Z) - If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is________________?
A. 8 cm
B. 6 m
C. 8 m
D. 10 m - is the pre- stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is________________?
A. f = (P/A) – (Z/M)
B. f = (A/P) – (M/Z)
C. f = (P/A) – (M/Z)
D. f = (P/A) – (M/6Z) - An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is_______________?
A. 8.3 kg/cm2
B. 7.6 kg/cm2
C. 21.5 kg/cm 2
D. 11.4 kg/cm2 - The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
A. Is safe in shear
B. Is unsafe in shear
C. Is over safe in shear
D. Needs redesigning - If the shear stress in a R.C.C. beam is_______________?
A. Equal or less than 5 kg/cm2, no shear reinforcement is provided
B. Greater than 4 kg/cm2, but less than 20 kg/cm2, shear reinforcement is provided
C. Greater than 20 kg/cm2, the size of the section is changed
D. All the above
- If is the sectional area of a pre-stressed rectangular beam provided with a tendon pre -stressed by a force through its centroidal longitudinal axis, the compressive stress in concrete, is_______________?
A. P/A
B. A/P
C. P/2A
D. 2A/P - The maximum shear stress (q) in concrete of a reinforced cement concrete beam is_____________?
A. Shear force/(Lever arm × Width)
B. Lever arm/(Shear force × Width)
C. Width/(Lever arm × Shear force)
D. (Shear force × Width)/Lever arm - If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2, the share stirrups are provided for a distance from either end where, is________________?
A. 50 cm
B. 100 cm
C. 150 cm
D. 200 cm - Distribution of shear intensity over a rectangular section of a beam, follows_________________?
A. A circular curve
B. A straight line
C. A parabolic curve
D. An elliptical curve
