A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm
Related Mcqs:
- A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is____________________?
A. bn (fc/2) (d – n/3)
B. Atft (d – n/3)
C. ½ n1 (1 – n1/3) cbd²
D. All the above - If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?
A. 37 cm
B. 38 cm
C. 39 cm
D. 40 cm
- A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - effective depth and depth of the neutral axis respectively of a singly reinforced If d and n are the beam, the lever arm of the beam, is_________________?
A. d
B. n
C. d + n/3
D. d – n/3 - In a doubly-reinforced beam if and the effective depth and is depth of critical neutral axis, the following relationship holds good______________?
A. mc/t = n/(d – n)
B. (m + c)/t = n/(d + n)
C. (t + c)/n = (d + n)/n
D. mc/t = (d – n)/t - If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is__________________?
A. 0.496 %
B. 0.596 %
C. 0.696 %
D. 0.796 %
- The reinforced concrete beam which has width 25 cm, lever arm 40 cm, shear force 6t/cm2, safe shear stress 5 kg/cm2 and B.M. 24 mt________________?
A. Is safe in shear
B. Is unsafe in shear
C. Is over safe in shear
D. Needs redesigning - If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is________________?
A. 200 cm
B. 300 cm
C. 150 cm
D. 100 cm - A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is___________________?
A. 30
B. 35
C. 40
D. 45 - If the modular ratio is , steel ratio is and overall depth of a beam is , the depth of the critical neutral axis of the beam, is___________________?
A. [m/(m – r)] d
B. [m/(m + r)] d
C. [(m + r)/ m] d
D. [(r – m)/m] d
