A. [m/(m – r)] d
B. [m/(m + r)] d
C. [(m + r)/ m] d
D. [(r – m)/m] d
Related Mcqs:
- A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is____________________?
A. bn (fc/2) (d – n/3)
B. Atft (d – n/3)
C. ½ n1 (1 – n1/3) cbd²
D. All the above - A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is_________________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - effective depth and depth of the neutral axis respectively of a singly reinforced If d and n are the beam, the lever arm of the beam, is_________________?
A. d
B. n
C. d + n/3
D. d – n/3 - In a doubly-reinforced beam if and the effective depth and is depth of critical neutral axis, the following relationship holds good______________?
A. mc/t = n/(d – n)
B. (m + c)/t = n/(d + n)
C. (t + c)/n = (d + n)/n
D. mc/t = (d – n)/t - The stresses developed in concrete and steel in reinforced concrete beam 25 cm width and 70 cm effective depth, are 62.5 kg/cm2 and 250 kg/cm 2 respectively. If m = 15, the depth of its neutral axis is_______________?
A. 20 cm
B. 25 cm
C. 30 cm
D. 35 cm - If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is______________?
A. 37 cm
B. 38 cm
C. 39 cm
D. 40 cm
- For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to______________?
A. 10
B. 15
C. 25
D. 20 - A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is______________?
A. 2.5
B. 2.0
C. Less than 2
D. Less than 2.5 - A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is___________________?
A. 14 cm 2
B. 15 cm2
C. 16 cm2
D. 17 cm2 - If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is__________________?
A. 0.496 %
B. 0.596 %
C. 0.696 %
D. 0.796 %
