A. tension on tight side of belt
B. tension on slack side of belt
C. radius of pulley
D. speed of pulley
E. all of the above
Related Mcqs:
- In multi-V-belt transmission, if one of the belt is broken, we have to change the_________________?
A. broken belt
B. broken belt and its adjacent belts
C. all the belts
D. there is no need of changing any one as remaining belts can take care of transmission of load
E. all the weak belts - In automobiles the power is transmitted from gear box to differential through _________________?
A. bevel gear
B. universal joint
C. Hooke’s joint
D. Knuckle joint
E. Oldham’s coupling - A completely constrained motion can be transmitted with __________________?
A. 1 link with pin joints
B. 2 links with pin joints
C. 3 links with pin joints
D. 4 links with pin joints
E. all of the above - Pulley in a belt drive acts as_______________?
A. cylindrical pair
B. turning pair
C. rolling pair
D. sliding pair
E. surface pair - Creep in belt drive is due to____________________?
A. material of the pulley
B. material of the belt
C. larger size of the driver pulley
D. uneven extensions and contractions due to varying tension
E. expansion of belt - If D1 and D2 be the diameters of driver and driven pulleys, then belt speed is proportional to__________________?
A. D1/D2
B. D2/D1
C. D1-D2.
D. D1
E. D1+D2 - Cross head and guides form a _________________?
A. lower pair
B. higher pair
C. turning pair
D. rolling pair
E. sliding pair - In S.H.M., the velocity vector w.r.t. displacement vector _________________?
A. leads by 90°
B. lags by 90°
C. leads by 180°
D. are in phase
E. could be anywhere. - In S.H.M., acceleration is proportional to _________________?
A. velocity
B. displacement
C. rate of change of velocity
D. all of the above
E. none of the above - To transmit power from one rotating shaft to another whose axes are neither parallel nor intersecting, use__________________?
A. spur gear
B. spiral gear
C. bevel gear
D. worm gear
E. crown gear
