The termal efficiency of a petrol engine at design load is around_________________?

Related Mcqs:

1. The thermal efficiency of a petrol engine of two stroke with crank case scavenging as compared to four stroke petrol engine with same comperssion ratio will be_____________________?

   A. higher
   B. lower
   C. same
   D. depends on size of engine
   E. unpredictable.

2. A diesel engine as compared to petrol engine (both running ar rated load) is ____________________?

   A. more efficient
   B. less efficient
   C. equally efficient
   D. unperdictable
   E. other factors will decide it

3. With increase in engine speed, the ignition of spark in petrol engine has to be __________________?

   A. Unaltered
   B. Increased
   C. Decreased
   D. Advanced

4. Diesel engine can work on very lean air fuel ratio of the order of 30 : 1. A petrol engine can also work on such a lean ratio provided__________________?

   A. it is properly designed
   B. best quality fuel is used
   C. can not work as it is impossible
   D. flywheel size is proper
   E. engine cooling is stopped

5. The specific fuel consumption of a petrol engine compared to diesel engine of same H.P. is_______________?

   A. same
   B. more
   C. less
   D. less or more depending on operating conditions
   E. unpredictable

6. The thermal efficiency of a two cycle engine as compared to four cycle engine is_________________?

   A. more
   B. less
   C. same
   D. more upto some load and then less
   E. it may be less or more depending on several other factors

7. Diesel engines have low specific fuel consumption compared to petrol engine. This statement is____________________?

   A. not true
   B. true at full load
   C. true at part load
   D. true at both part and full load
   E. there could not be any such criterion

8. The m.e.p. of a petrol engine first increases as the fuel air ratio is increased and then decreases on further increase in fuel air ratio. The M.E.P is maximum in the zone of________________?

   A. lean mixture
   B. chemically correct mixture
   C. rich mixture
   D. unpredictable
   E. none of the above

9. For low speed operation or for idling in petrol engines, the engine requirements are for_______________?

   A. lean mixture
   B. theoretically correct mixture
   C. rich mixture
   D. any type of mixture
   E. lean/rich mixture depending upon capacity of engine

10. In the case of petrol engine at maximum output, the percentage of CO in exhaust gases is ____________________?

    A. Zero
    B. 5-10%
    C. Depends on load and quality of fuel
    D. Considerable percent