A. 50 : 50
B. 40 : 60
C. 60 : 40
D. 20 : 80
E. 80 : 20
Related Mcqs:
- Admiralty brass used for steam condenser tubes contains copper and zinc in the following ratio_________________?
A. 50 : 50
B. 30 : 70
C. 70 : 30
D. 40 : 60
E. 60 : 40 - Aluminium bronze contains aluminium and copper in the ratio of___________________?
A. 50 : 50
B. 40 : 60
C. 60 : 40
D. 10 : 90
E. 90 : 10 - Brass (alloy of copper and zinc) is an example of__________________?
A. substitutional solid solution
B. interstitial solid solution
C. intermetallic compounds
D. all of the above
E. none of the above - Auto-ignition reaction time for petrol engine first decreases with increase in fuel air ratio, reaches a minimum value and then increases with subsequent increase in fuel air ratio. The minimum value occurs in the region of________________?
A. Lean mixture
B. Chemically correct fuel air ratio
C. Rich mixture
D. Unpredictable - The m.e.p. of a petrol engine first increases as the fuel air ratio is increased and then decreases on further increase in fuel air ratio. The M.E.P is maximum in the zone of________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Alnico, an alloy used extensively for permanent magnets contains iron, nickel, aluminium and cobalt in the following ratio _____________________?
A. 50 : 20 : 20 : 10
B. 40 : 30 : 20 : 10
C. 50 : 20 : 10 : 20
D. 30 : 20 : 30 : 20
E. 50 : 10 : 20 : 20 - In petrol engines, the maximum power is developed corresponding to relative fuel air ratio of________________?
A. 0.85
B. 1
C. 1.1 to 1.3
D. 1.2 to 1.5 - Which of the following alloys does not have copper as one of the constituents________________?
A. delta metal
B. monel metal
C. constantan
D. nichrome
E. silicon bronze - Addition of copper to aluminium results in_____________________?
A. improvement of casting characteristics
B. improvement of corrosion resistance
C. one of the best known age and precipitation-hardening systems
D. improving machinability
E. none of the above - The specific fuel consumption for a petrol engine first decreases with increase in fuel air ratio and then increases with further increase in fuel air ratio. The minimum value occurs in the range of__________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above