A. minimum temperature to which1 oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
B. temperature at which it solidifies or congeals
C. temperature at which it catches fire without external aid
D. indicated by 90% distillation temperature, i.e. when 90% of sample oil has distilled off
E. none of the above
Related Mcqs:
- The specific fuel consumption for a petrol engine first decreases with increase in fuel air ratio and then increases with further increase in fuel air ratio. The minimum value occurs in the range of__________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Which is correct statement about reaction time for autoignition of fuel and the fuel air ratio__________________?
A. lean mixture has high reaction time
B. rich mixture has high reaction time
C. chemically correct mixture has mini-mum reaction time
D. all of the above
E. non of the above - Auto-ignition reaction time for petrol engine first decreases with increase in fuel air ratio, reaches a minimum value and then increases with subsequent increase in fuel air ratio. The minimum value occurs in the region of________________?
A. Lean mixture
B. Chemically correct fuel air ratio
C. Rich mixture
D. Unpredictable - The m.e.p. of a petrol engine first increases as the fuel air ratio is increased and then decreases on further increase in fuel air ratio. The M.E.P is maximum in the zone of________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Fuel oil consumption guarantees for I .C. engine are usually based on__________________?
A. low heat value of oil
B. high heat value of oil
C. net calorific value of oil
D. calorific value of fuel
E. all of the above - Volatility of diesel fuel oil is_________________?
A. minimum temperature to which oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
B. temperature at which it solidifies or congeals
C. it catches fire without external aid
D. indicated by 90% distillation temperature, i.e., when 90% of sample oil has distilled off
E. temperature at which it flows easily - Pour point of fuel oil is the_________________?
A. minimum temperature to which oil is heated in order to give off inflammable vapours in sufficient quantity to ignite momentarily when brought in contact with a flame
B. temperature at which it solidifies or congeals
C. it catches fire without external aid
D. indicated by 90% distillation temperature i.e., when 90% of sample oil has distilled off
E. temperature at which it flows easily - Ignition quality of diesel-fuel oil is expressed by an index called__________________?
A. octane number
B. cetane number
C. calorific value
D. carbon content
E. ignition temperature - A fuel will detonate less if it has___________________?
A. higher self ignition temperature
B. lower self ignition temperature
C. proper self ignition temperature
D. self ingition temperature has nothing to do with detonation
E. none of the above - Which of the following is mostly used used as blast furnace fuel for extracting pig iron from iron ores?
A. Brown coal
B. Anthracite coal
C. Hard coke
D. Woodchar coalSubmitted by: Faheem Zaman Dhaunroo