A. centrifugal
B. axial flow
C. mixed flow
D. propeller
E. reciprocating
Related Mcqs:
- For very high discharge at low pressure such as for flood control and irrigation applications, following type of pump is preferred_________________?
A. centrifugal
B. axial flow
C. reciprocating
D. mixed flow
E. none of the above - If a pump is handling water and is discharging a certain flow Q at a constant total dynamic head requiring a definite B.H.P., the same pump when handling a liquid of specific gravity 0.75 and viscosity nearly same as of water would discharge_____________________?
A. same quantity of liquid
B. 0.75 Q
C. Q/0.75
D. 1.5 Q
E. none of the above - A turbine pump is basically a centrifugal pump equipped additionally with_________________?
A. adjustable blades
B. backward curved blades
C. vaned diffusion casing
D. inlet guide blades
E. totally submerged operation facility - High specific speed of a pump implies it is_____________________?
A. centrifugal pump
B. mixed flow pump
C. axial flow pump
D. any one of the above
E. none of the above - Pressure intensifier increases the pressure in proportion to____________________?
A. ratio of diameters
B. square of ratio of diameters
C. inverse ratio of diameters
D. square of inverse ratio of diameters
E. fourth power of ratio of diameters - The discharge through a reaction turbine with increase in unit speed____________________?
A. increases
B. decreases
C. remains unaffected
D. first increases and then decreases
E. first decreases and then increases - In a single casing, multistage pump running at constant speed, the capacity rating is to be slightly lowered. It can be done by_______________?
A. designing new impeller
B. trimming the impeller size to the required size by machining
C. not possible
D. some other alterations in the impeller
E. none of the above - Low specific speed of a pump implies it is____________________?
A. centrifugal pump
B. mixed flow pump
C. axial flow pump
D. any one of the above
E. none of the above - Air vessels in reciprocating pump are used to__________________?
A. smoothen flow
B. reduce acceleration to minimum
C. increase pump efficiency
D. save pump from cavitation
E. increase pump head - Saving of work done and power by fitting an air vessel to single acting reciprocating pump is of the order of__________________?
A. 39.2%
B. 49.2%
C. 68.8%
D. 84.8%
E. 91.6%.