A. increases
B. decreases
C. remains unaffected
D. first increases and then decreases
E. first decreases and then increases
Related Mcqs:
- In reaction turbine, draft tube is used_____________________?
A. to transport water downstream without eddies
B. to convert the kinetic energy to flow energy by a gradual expansion of the flow cross-section
C. for safety of turbine
D. to increase flow rate
E. none of the above - High specific speed of turbine implies it is__________________?
A. propeller turbine
B. Francis turbine
C. impulse turbine
D. any one of the above
E. none of the above - The maximum number of jets generally employed in impulse turbine without jet interference is________________?
A. 4
B. 6
C. 8
D. 12
E. 16. - Guide angle as per the aerofoil theory of Kaplan turbine blade design is defined as the angle between_________________?
A. lift and resultant force
B. drag and resultant force
C. lift and tangential force
D. lift and drag
E. resultant force and tangential force - Which place in hydraulic turbine is most susceptible for cavitation __________________?
A. inlet of draft rube
B. blade inlet
C. guide blade
D. penstock
E. draft tube exit - Francis turbine is best suited for_____________________?
A. medium head application from 24 to 180 m
B. low head installation up to 30 m
C. high head installation above 180 m
D. all types of heads
E. none of the above - Impulse turbine is generally fitted______________________?
A. at the level of tail race
B. little above the tail race
C. slightly below the tail race
D. about 2.5 m above the tail race to avoid cavitation
E. about 2.5 m below the tail race to avoid cavitation - A turbine pump is basically a centrifugal pump equipped additionally with_________________?
A. adjustable blades
B. backward curved blades
C. vaned diffusion casing
D. inlet guide blades
E. totally submerged operation facility - Runaway speed of a hydraulic turbine is_________________?
A. full load speed
B. the speed at which turbine runner will be damaged
C. the speed if the turbine runner is allowed to revolve freely without load and with the wicket gates wide open
D. the speed corresponding to maximum overload permissible
E. none of the above. - Low specific speed of turbine implies it is__________________?
A. propeller turbine
B. Francis turbine
C. impulse turbine
D. any one of the above
E. none of the above