A. 1 kg
B. 4/3kg
C. 8/3kg
D. 2 kg
E. 16/3 kg
Related Mcqs:
- The percentage of carbon in low carbon steel is__________________?
A. 0.05%
B. 0.15%
C. 0.3%
D. 0.5%
E. 0.7%. - High carbon steel carries carbon %age c_________________?
A. 0.1 to 0.3%
B. 0.3 to 0.6%
C. 0.6 to 0.8%
D. 0.8 to 1.5%
E. 1.5 to 2.5%. - Maximum percentage of carbon in ferrite is___________________?
A. 0.025%
B. 0.06%
C. 0.1%
D. 0.25%
E. 0.8%. - Overfire burning is the phenomenon of _____________________?
A. supply of excess, air
B. supply of excess coal
C. burning CO and unburnts in upper zone of furnace by supplying more air
D. fuel bed firing
E. none of the above - 02 content in atmospheric air on volume basis is___________________?
A. 21%
B. 23%
D. 30%
D. 40%
E. 70% - A hydraulic press has a ram of 15 cm diameter and plunger of 1.5 cm. It is required to lift a weight of 1 tonne. The force required on plunger is equal to_________________?
A. 10 kg
B. 100 kg
C. 1000 kg
D. 1 kg
E. 10,000 kg - It is required to produce large amount of steam at low pressure. Which boiler should be used ?
A. pulverised fuel fired boiler
B. cochran boiler
C. lancashire boiler
D. babcock and wilcox boiler
E. stoker fired boiler - Primary air is the air used to__________________?
A. provide air around burners for obtaining optimum combustion
B. transport and dry the coal
C. convert CO (formed in lower zone of furnace) into C02 at higher zone
D. air-delivered by forced draft fan
E. none ot the above - Tertiary air is the air used to____________________?
A. provide air around burners for obtaining optimum combustion
B. transport and dry the coal
C. cool the scanners
D. supply air for ignitors
E. convert CO (formed in lower zone of furnace) into C02 at higher zone - Which is correct statement about reaction time for autoignition of fuel and the fuel air ratio__________________?
A. lean mixture has high reaction time
B. rich mixture has high reaction time
C. chemically correct mixture has mini-mum reaction time
D. all of the above
E. non of the above
