A. instantaneous auto-ignition of last part of charge to be burnt
B. improper mixing of air and fuel
C. improper combustion
D. self ignition temperature has nothing to do with detonation
E. none of the above
Related Mcqs:
- Detonation is caused by the following unstable compounds______________________?
A. peroxides, aldehydes and ketones
B. peroxides, aldehydes, oxides and sul-phides
C. aldehydes, oxides and ketones
D. ketones and sulphur compounds
E. none of the above - Detonation can be controlled by_____________________?
A. varying compression ratio
B. using lian mixture
C. retarding the spark timing
D. reducing the r.p.m.
E. increasing inlet pressure - As a result of detonation in an I.C. engine, following parameter attains very high value _____________________?
A. peak pressure
B. rate of rise of pressure
C. rate of rise of temperature
D. peak temperature
E. rate of rise of horse-power - The function of a fuel pump in a petrol pump is to______________________?
A. inject fuel in cylinder
B. supply fuel when carburettor fails
C. pump fuel so that it reaches carburettor (to improve thermal efficiency)
D. does not exist - The knock in diesel engine occurs due to____________________?
A. instantaneous and rapid burning of the first part of the charge
B. instantaneous atuo iginition of last part of charge
C. delayed burning of the first part of the charge
D. reduction of delay period
E. all ot the above - Compression loss in I.C engines occurs due to_________________?
A. leaking piston rings
B. use of thick head gasket
C. clogged air-inlet slots
D. increase in clearance volume caused b bearing-bushing wear
E. all of the above - Maximum energy loss in a boiler occurs due to _______________________?
A. unburnt carbon in ash
B. incomplete combustion
C. ash content
D. flue gases
E. radiation losses - The specific fuel consumption for a petrol engine first decreases with increase in fuel air ratio and then increases with further increase in fuel air ratio. The minimum value occurs in the range of__________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Auto-ignition reaction time for petrol engine first decreases with increase in fuel air ratio, reaches a minimum value and then increases with subsequent increase in fuel air ratio. The minimum value occurs in the region of________________?
A. Lean mixture
B. Chemically correct fuel air ratio
C. Rich mixture
D. Unpredictable - Steady flow occurs when___________________?
A. the direction and magnitude of the velocity at all points are identical
B. the velocity of successive fluid particles, at any point, is the same at successive periods of time
C. the magnitude and direction of the velocity do not change from point to point in the fluid
D. the fluid particles move in plane or parallel planes and the streamline pat-terns are identical in each plane
E. velocity, depth, pressure, etc. change from point to point in the fluid flow