A. smooth and streamline flow
B. laminar flow
C. steady flow
D. turbulent flow
E. highly turbulent flow
Related Mcqs:
- Gardually increasing temperature of flue gases at inlet to chimney for given steam outputs is an indication of__________________?
A. higher effectiveness of boiler
B. high calorific value coal being burnt
C. fouling of heat transfer surfaces
D. raising of steam temperature
E. leakage of air - Poise is the unit of________________?
A. surface tension
B. capillarity
C. viscosity
D. shear stress in fluids
E. buoyancy - The m.e.p. of a petrol engine first increases as the fuel air ratio is increased and then decreases on further increase in fuel air ratio. The M.E.P is maximum in the zone of________________?
A. lean mixture
B. chemically correct mixture
C. rich mixture
D. unpredictable
E. none of the above - Solid injection in I.C. engines refers to injection of________________?
A. liquid fuel only
B. liquid fuel and air
C. solid fuel
D. solid fuel and air
E. does not exist - Ferromagnetic alpha iron exists in temperature range of________________?
A. below 723°C
B. 770 – 910°C
C. 910-1440°C
D. 1400-1539°C
E. above 1539°C - Solder is an alloy consisting of________________?
A. tin, antimony, copper
B. tin and copper
C. tin and lead
D. lead and zinc
E. lead and copper - Cyaniding is the process of________________?
A. dipping steel in cyanide bath
B. reacting steel surface with cyanide salts
C. adding carbon and nitrogen by heat treatment of steel to increase its surface hardness
D. obtaining cyanide salts
E. making corrosion resistant steel - Corrosion resistance of steel is increased by addition of________________?
A. chromium and nickel
B. sulphur, phosphorus, lead
C. vanadium, aluminium
D. tungsten, molybdenum, vanadium, chromium
E. zinc - Muntz metal contains copper and zinc in the ratio of________________?
A. 50 : 50
B. 40 : 60
C. 60 : 40
D. 20 : 80
E. 80 : 20 - The heat loss in a boiler takes place in the form of________________?
A. heat carried away by flue gases
B. heat carried away by ash
C. moisture present in fuel and steam formed by combustion of hydrogen in fuel
D. radiation
E. all of the above
