A. torque will remain constant
B. torque will change but power will remain constant
C. torque and power both will change
D. torque, power and speed, all will change
Related Mcqs:
- If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens__________?
A. nothing will happen to the motor
B. this will make armature to take heavy current, possibly burning it
C. this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses D. motor will run at very slow speed - If a D.C. shunt motor is working at full load and if shunt field circuit suddenly opens____________?
A. this will make armature to take heavy current, possibly burning it
B. this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses
C. nothing will happen to motor
D. motor will come to stop - If the field of a D.C. shunt motor gets opened while motor is running______________?
A. the speed of motor will be reduced %
B. the armature current will reduce
C. the motor will attain dangerously high speed 1
D. the motor will continue to nuvat constant speed - If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will_________?
A. increase
B. decrease
C. remain same
D. become zero - By looking at which part of the motor, it can be easily confirmed that a particular motor is D.C. motor?
A. Frame
B. Shaft
C. Commutator
D. Stator - Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be_____________?
A. level compounded
B. under compounded
C. cumulatively compounded
D. differentially compounded - One D.C. motor drives another D.C. motor. The second D.C. motor when excited and driven_______________?
A. runs as a generator
B. does not run as a generator
C. also runs as a motor comes to stop after sometime - The speed of a D.C. shunt motor can be increased by_______________?
A. increasing the resistance in armature circuit
B. increasing the resistance in field circuit
C. reducing the resistance in the field circuit
D. reducing the resistance in the armature circuit - In a manual shunt motor starter?
A. over load relay is connected in series and no volt relay in parallel with the load
B. over load relay is connected in parallel and no volt relay in series with the load
C. over load relay and no volt relay are both connected in series with the load
D. over load relay and no volt relay are both connected in parallel with the load - If the load on a DC shunt motor is increases, its speed is slightly reduced due to______________?
A. increase in armature current
B. increase in flux
C. decrease in reactance
D. decrease in back emf
