A. 3 db
B. 66 db
C. 20 db
D. 200 db
Related Mcqs:
- A radio receiver has____________of amplification?
A. One stage
B. Two stages
C. Three stages
D. More than one stages - For faithful amplification by a transistor circuit, the value of VCE should______________for silicon transistor?
A. Not fall below 1 V
B. Be zero
C. Be 0.2 V
D. None of the above - For proper amplification by a transistor circuit, the operating point should be located at the_____________ of the d.c. load line?
A. The end point
B. Middle
C. The maximum current point
D. None of the above - For faithful amplification by a transistor circuit, the value of VBE should_____________for a silicon transistor?
A. Be zero
B. Be 0.01 V
C. Not fall below 0.7 V
D. Be between 0 V and 0.1 V - For germanium transistor amplifier, VCE should_______________for faithful amplification?
A. Be zero
B. Be 0.2 V
C. Not fall below 0.7 V
D. None of the above - An amplifier has a power gain of 100. Its db gain is ________________?
A. 10 db
B. 20 db
C. 40 db
D. None of the above - If the power and current gains of a transistor amplifier are 16500 and 100 respectively, then voltage gain is_____________________?
A. 165
B. 165 x 104
C. 100
D. None of the above - In an RC coupled amplifier, the voltage gain over mid-frequency range_____________?
A. Changes abruptly with frequency
B. Is constant
C. Changes uniformly with frequency
D. None of the above - The total gain of a multistage amplifier is less than the product of the gains of individual stages due to____________?
A. Power loss in the coupling device
B. Loading effect of the next stage
C. The use of many transistors
The use of many capacitors - If a three-stage amplifier has individual stage gains of 10 db, 5 db and 12 db, then total gain in db is____________?
A. 600 db
B. 24 db
C. 14 db
D. 27 db