A. Water test is carried out to check water tightness of the joints
B. Test for straightness is carried out with the help of a lamp and mirror
C. Obstruction test is carried out with the help of smooth ball of diameter 13 mm
D. All the above
Related Mcqs:
- If the flame of a miner’s safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains_______________?
A. Hydrogen sulphide
B. Carbon dioxide
C. Methane
D. Oxygen - If the discharge of a sewer running half is 628 1.p.s., i = 0.001, and n = 0.010, the diameter of the sewer, is__________________?
A. 1.39 m
B. 1.49 m
C. 1.59 m
D. 1.69 m - The spacing of man holes along a straight portion of a sewer is 300 m, the diameter of the sewer may be__________________?
A. 0.9 cm
B. 1.2 m
C. 1.5 m
D. > 1.5 m - The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is________________________?
A. 20 cm
B. 25 cm
C. 40 cm
D. 50 cm - The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is______________?
A. 0.68 m
B. 0.88 m
C. 1.36 m
D. 1.76 m - Assertion A.: The minimum self cleansing velocity in the sewer, at least once a day, must be generated. Reason (R): If certain deposition takes place and is not removed, it obstructs free flow and causes further deposition leading to complete blocking of the sewer?
A. Both A and R are true and R is the correct explanation of A
B. Both A and R are true but R is not a correct explanation of A
C. A is true but R is false
D. A is false but R is true - You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at___________________?
A. Full depth
B. Half full
C. Two third full
D. Three fourth full - weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is________________________?
A. w r S S
B. w r1/2
C. w r S
D. w r2/3 - The porosity of sediments in sewer pipes, is usually taken as___________________?
A. 0.010
B. 0.011
C. 0.012
D. 0.013 - In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept________________?
A. 10.0
B. 5.0
C. 2.0
D. 0.25
