A. 20 cm
B. 25 cm
C. 40 cm
D. 50 cm
Related Mcqs:
- weight of water, the hydraulic mean depth of the sewer and the bed slope w is the unit of the sewer, then the tractive force exerted by flowing water, is________________________?
A. w r S S
B. w r1/2
C. w r S
D. w r2/3 - If the depth of partial flow in a sewer of diameter 2 m, is 50 cm, its wetted perimeter is____________________ ?
A. 1/3
B. 0/2
C. 0/3
D. 2 /3 - You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at___________________?
A. Full depth
B. Half full
C. Two third full
D. Three fourth full - The width of a rectangular sewer is twice its depth while discharging 1.5 m/sec. The width of the sewer is______________?
A. 0.68 m
B. 0.88 m
C. 1.36 m
D. 1.76 m - A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is_____________________?
A. 0.30 m/sec
B. 0.35 m/sec
C. 0.40 m/sec
D. 0.45 m/sec - Assertion A.: The minimum self cleansing velocity in the sewer, at least once a day, must be generated. Reason (R): If certain deposition takes place and is not removed, it obstructs free flow and causes further deposition leading to complete blocking of the sewer?
A. Both A and R are true and R is the correct explanation of A
B. Both A and R are true but R is not a correct explanation of A
C. A is true but R is false
D. A is false but R is true - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow - If the depth of flow in a circular sewer is 1/4th of its diameter D, the wetted perimeter is______________?
A. /2
B. /4
C. /3
D. D - If the flame of a miner’s safety lamp in the upper layers of the sewer forms an explosive, the sewer certainly contains_______________?
A. Hydrogen sulphide
B. Carbon dioxide
C. Methane
D. Oxygen - If the discharge of a sewer running half is 628 1.p.s., i = 0.001, and n = 0.010, the diameter of the sewer, is__________________?
A. 1.39 m
B. 1.49 m
C. 1.59 m
D. 1.69 m