A. 900 minutes
B. 4 minutes
C. 4 x (225)3/2 minutes
D. 4 (225)1/3 minutes
E. 4 x V225 minutes
Related Mcqs:
- A model of torpedo is tested in a towing tank at a velocity of 25 m/sec. The prototype is expected to attain a velocity of 5 m/sec. What model scale has been used ?
A. 1 : 5
B. 1 : 2.5
C. 1 :25
D. 1:V5″
E. 1 : 53/2 - A model of torpedo is tested in a towing tank at a velocity of 25 m/sec. The prototype is expected to attain a velocity of 5 m/sec. What model scale has been used ?
A. 1 : 5
B. 1 : 2.5
C. 1 :25
D. 1:V5″
E. 1 : 53/2 - The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be____________________?
A. 500 kg
B. 1000 kg
C. 1500 kg
D. 2000 kg
E. 4000 kg. - The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be___________________?
A. 500 kg
B. 1000 kg
C. 1500 kg
D. 2000 kg
E. 4000 kg - The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be ________________?
A. 500 kg
B. 1000 kg
C. 1500 kg
D. 2000 kg
E. 4000 kg - The depth of the center of pressure on a vertical rectangular gate 8 m wide and 6 m high, when the water surface coincides with the top of the gate, is ______________________?
A. 2.4 m
B. 3.0 m
C. 4.0 m
D.”2.5 m
E. 5.0 m - The depth of the center of pressure on a vertical rectangular gate 8 m wide and 6 m high, when the water surface coincides with the top of the gate, is____________________?
A. 2.4 m
B. 3.0 m
C. 4.0 m
D. ”2.5 m
E. 5.0 m - For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal__________________?
A. ratio of inertial force to force due to viscosity
B. ratio of inertial force to force due to gravitation
C. ratio of inertial force to force due to surface tension
D. all the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity - If the diameter of sewer is 225 mm, the gradient required for generating self cleansing velocity, is___________________?
A. 1 in 60
B. 1 in 100
C. 1 in 120
D. None of these - In a residential colony, sewers of diameters 100 mm, 150 mm and 225 mm were laid with a gradient 1 in 120. Which portion of the sewage system does not choke in due course of time?
A. 100 mm dia.
B. 150 mm dia.
C. 225 mm dia.
D. All of these