A. 2.4 m
B. 3.0 m
C. 4.0 m
D. ”2.5 m
E. 5.0 m
Related Mcqs:
- The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be ________________?
A. 500 kg
B. 1000 kg
C. 1500 kg
D. 2000 kg
E. 4000 kg - A square surface 3 m x 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is____________________?
A. 9,000 kg
B. 13,500 kg
C. 18,000 kg
D. 27,000 kg
E. 30,000 kg - Total pressure on a lmxlm gate immersed vertically at a depth of 2 m below the free water surface will be_______________?
A. 1000 kg
B. 4000 kg
C. 2000 kg
D. 8000 kg
E. 16000 kg - If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm”, the pressure at a depth of 50 m below the oil surface will be_________________?
A. 2 meters of water column
B. 3 meters of water column
C. 5 meters of water column
D. 6 meters of water Column
E. 7 meters of water column - The center of pressure of a surface subjected to fluid pressure is the point_______________?
A. on the surface at which resultant pres-sure acts
B. on the surface at which gravitational force acis
C. at which all hydraulic forces meet
D. similar to metacentre
E. where pressure equivalent to hydraulic thrust will act - The pressure in the air space above an oil (sp. gr. 0.8) surface in a tank is 0.1 kg/cm”. The pressure at 2.5 m below the oil surface will be __________________?
A. 2 metres of water column
B. 3 metres of water column
C. 3.5 metres of water column
D. 4 m of water column
E. none of the above - If w is the specific weight of liquid and k the depth of any point from the surface, then pressure intensity at that point will be________________?
A. h
B. wh
C. w/h
D. h/w
E. h/wh - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow - At the center line of a pipe flowing under pressure where the velocity gradient is zero, the shear stress will be_________________?
A. minimum
B. maximum
C. zero
D. negative value
E. could be any value - Center of pressure compared to e.g. is___________________?
A. above it
B. below it
C. at same point
D. above or below depending on area of body
E. none of the above