A. Surf
B. Clapotis
C. Fetch
D. Swell
Advertisement
Related Mcqs:
- If H is the height of the wave expected, then the height of the breakwater is generally taken as______________________?
- A. 1.2 H to 1.25 H above the datum B. 1.2 H to 1.25 H above the low water level C. 1.2 H to 1.25 H above the high water level D. 1.2 H to 1.25 H above the mean sea level...
- As compared to wall type breakwater, mound type breakwater_________________?
- A. requires skilled labour B. requires low maintenance cost C. requires less material D. results in less damage due to gradual failure...
- If Hs is the significant wave height, then the average wave height and highest wave height respectively are given by_______________?
- A. 0.6 Hs and 1.67 Hs B. 0.6 Hs and 1.87 Hs C. 1.27 Hs and 1.87 Hs D. 1.27 Hs and 1.67 Hs...
- Assertion A : Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R : No wave can have a height greater than the depth of water through which it passes?
- Select your answer based on the coding system given below? A. Both A and R are true and R is correct explanation of A. B. Both A and R are true but R is not the correct explanation of A. C. A is true but R is false. D. A is false but R is...
- If the maximum spring rise is 2 m and height of the waves expected is 4 m , then the breakwater height above the datum will be_________________?
- A. 2.5 m B. 4 m C. 5 m D. 7 m...
- Assertion A : Large size stones are required in stone revetment in shore protection. Reason R : Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone?
- Select your answer based on the coding system given below A. Both A and R are true and R is the correct explanation of A B. Both A and R are true but R is not a correct explanation of A C. A is true but R is false D. A is false but R...
- A ship strikes the berth generally at an angle_________________?
- A. 90° with the face of the dock B. 45° with the face of the dock C. 30° with the face of the dock D. 10° with the face of the dock...
- When a ship floats at its designed water line, the vertical distance from water line to the bottom of the ship is known as________________?
- A. beam B. depth C. freeboard D. draft...
- The significant wave height is defined is the average height of the_________________?
- A. one – third highest waves B. one – fourth highest waves C. one – fifth highest waves D. one – tenth highest waves...
- As per Berlin’s formula, the length of wave in metres is given by_______________?
- A. 1.3412 B. 1.5612 C. 1.7412 D. 1.9412 where ‘t’ is the period in seconds for two successive waves to pass the same section...
Advertisement