A. has good strength along the panel only
B. can be spilt in the plane of the panel
C. has greater impact resistance to blows than ordinary wood
D. cannot be bent more easily than ordinary wood of same thickness
Related Mcqs:
- Based on the following rocks and minerals, select the correct statement, quartz, shale, basalt, granite, marble, gypsum, mica______________?
A. basalt and marble are the only metamorphic rocks
B. there is no sedimentary rock
C. granite is the only igneous rock
D. quartz and mica are minerals - The practical limit of moisture content achieved in air drying of timber is________________?
A. 5%
B. 15%
C. 25%
D. 35% - Pug mill is used for_______________?
A. preparation of clay
B. moulding of clay
C. drying of bricks
D. burning of bricks - Glazing is used to make earthenware______________?
A. hard
B. soft
C. porous
D. impervious - Addition of pozzolana to ordinary Portland cement increases__________________?
A. bleeding
B. shrinkage
C. permeability
D. heat of hydration - Three basic raw materials which are needed in large quantities for production of steel are_______________?
A. iron ore, coal and sulphur
B. iron ore, carbon and sulphur
C. iron ore, coal and lime stone
D. iron ore, carbon and lime stone - The basic purpose of a retarder in concrete is_____________?
A. to increase the initial setting time of cement paste in concrete
B. to decrease the initial setting time of cement paste in concrete
C. to render the concrete more water tight
D. to improve the workability of concrete mix - The slenderness ratio for masonry walls should not be more than_____________?
A. 10
B. 20
C. 30
D. 40 - Higher pitch of the roof (1) results in stronger roof (2) results in weaker roof (3) requires more covering material (4) requires less covering material The correct answer is___________?
A. (1) and (3)
B. (1) and (4)
C. (2) and (3)
D. (2) and (4) - Minimum width of landing should be_______________?
A. equal to width of stairs
B. half the width of stairs
C. twice the width of stairs
D. one fourth the width of stairs
