Minimum width of landing should be_______________?

Related Mcqs:

1. As per IS specifications, the maximum final setting time for ordinary Portland cement should be_______________?

   A. 30 minutes B. 1 hour C. 6 hours D. 10 hours...

2. Minimum thickness of wall where single flemish bond can be used is_____________?

   A. half brick thick B. one brick thick C. one and a half bricks thick D. two bricks thick...

3. The minimum depth of foundation in clayey soils is_______________?

   A. 0.5 m B. 0.7 m C. 0.9 m D. 1.2 m...

4. In any good staircase, the maximum and minimum pitch respectively should be_____________?

   A. 90° and 0° B. 75° and 30° C. 60° and 10° D. 40° and 25°...

5. Spalling hammer is used for_____________?

   A. driving wooden headed chisels B. rough dressing of stones C. carving of stones D. breaking small projection of stones...

6. The trunk of tree left after cutting all the branches is known as_______________?

   A. log B. batten C. plank D. baulk...

7. The frog of the brick in a brick masonry is generally kept on______________?

   A. bottom face B. top face C. shorter side D. longer side...

8. According to IS specifications, the compressive strength of ordinary portland cement after three days should not be less than________________?

   A. 7 MPa B. 11.5 MPa C. 16 MPa D. 21 MPa...

9. Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to_________________?

   A. 1/2 B. 1 C. 2 D. 1/4...

10. The number of steps in a flight generally should not be less than________________?

    A. 2 B. 3 C. 5 D. no limit...