A. is uniform flow
B. is steady uniform flow
C. takes place in straight lines
D. involves zero transverse component of flow
E. takes place in one dimension
Related Mcqs:
- True one-dimensional flow occurs when___________________?
A. the direction and magnitude of the veiocity at all points are identical
B. the velocity of successive fluid par-ticles, at any point, is the same at suc-cessive periods of time
C. the magnitude and direction of the velocity do not change from point to point in the fluid
D. the fluid particles move in plane or parallel planes and the streamline pat-terns are identical in each plane
E. velocity, depth, pressure etc. change from point to point in the fluid flow - Two dimensional flow occurs when___________________?
A. the direction and magnitude of the velocity at all points are identical
B. the velocity of successive fluid par-ticles, at any point, is the same at suc-cessive periods of time
C. the magnitude and direction of the velocity do not change from point to point in the fluid
D. the fluid particles move in plane or parallel planes and the streamline pat-terns are identical in each plane
E. velocity, depth, pressure, etc. change from point to point in the fluid flow - When the flow parameters at any given instant remain same at every point, then flow is said to be____________________?
A. quasi static
B. steady state
C. laminar
D. uniform
E. static. - Normal depth in open channel flow is the depth of flow corresponding to_______________?
A. steady flow
B. unsteady flow
C. laminar flow
D. uniform flow
E. critical flow - The ratio of maximum sewage flow to average sewage flow for mains up to 1 m in diameter, is___________________?
A. 1.5
B. 2.0
C. 3.0
D. 4.0 - For trunk sewers more than 1.25 m in diameter, the ratio of the maximum daily sewage flow to the average daily sewage flow is assumed________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - The ratio of maximum sewage flow to average sewage flow for trunk mains having diameters more than 1.25 m, is____________________?
A. 1.5
B. 2.0
C. 3.0
D. 4.0 - For sewer mains of 0.5 to 1 m diameter, the ratio of maximum daily sewage flow to the average daily sewage flow is assumed__________________?
A. 1.5
B. 2.0
C. 2.5
D. 3.0 - The ratio of minimum hourly flow to the average flow of sewage is_________________?
A. 1/4
B. 1/3
C. 1/2
D. 3/4 - You are asked to design sewer pipes of diameters 0.4 m to 0.9 m at maximum flow, you will assume the sewer flow running at___________________?
A. Full depth
B. Half full
C. Two third full
D. Three fourth full