A. Cone
B. Dome
C. Umbrella
D. Flat
Related Mcqs:
- _____________ shaped roof is the most commonly used roof for cylindrical storage tanks?
A. Conical
B. Flat
C. Dome
D. Umbrella - For a cylindrical vessel of moderate height, the weld joint efficiency for joints parallel to the cylindrical axis is given as 1.0; while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylindrical vessel, what value of weld joint efficiency should be used ?
A. 0.8
B. 0.9
C. 1.0
D. (0.8)0.5 - A cylindrical storage tank can have a self supported conical roof ?
A. If its diameter is less than 15-20metres
B. If its diameter is more than 50 meters
C. If the thickness of the roof is more than that of the cylindrical shell
D. Irrespective of its diameter - Column support for the roof of cylindrical storage tank must be provided for___________________?
A. Small diameter tanks
B. Large diameter tanks
C. Small diameter tall tanks
D. All tanks irrespective of their heights and diameters - For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between ______________________ times the tank diameter?
A. 1 to 1.5
B. 2.5 to 3.5
C. 4 to 5
D. 6 to 8 - Most of the storage vessels/tanks are made cylindrical, because of the fact that a cylinder _________________?
A. Has greater structural strength
B. Is easy to fabricate
C. Both A. and B.
D. Neither A. nor B. - Cylindrical storage tanks used for the storage of volatile liquids (e.g., naphtha) have ______________ roofs?
A. Conical
B. Flat
C. Floating
D. Fixed - Normally, the plate thickness of the bottoms and roofs of vertically cylindrical storage vessels as compared to that of the cylindrical shell is____________?
A. More
B. Less
C. Same
D. More or less depending upon the pressure & temperature inside the vessel and the nature of
the fluid contained therein - Cylindrical shell thickness of rotary drier is generally _______________ mm?
A. 2-3
B. 18-22
C. 6-8
D. 12-15 - The testing pressure of storage tanks and pressure vessels designed as per Indian standard codes should be about ______________ times the design pressure?
A. 1.5 to 2
B. 3 to 4
C. 4 to 5
D. > 5
