A. 1
B. 4.08
C. 0.408
D. 40.8
Related Mcqs:
- Maximum viscosity of tar/PCM/fuel oil for easy and efficient atomisation in conventional burner is _______________ centistokes (or 100 Redwood I seconds) ?
A. 5
B. 25
C. 50
D. 100 - Equal volumes of aniline and diesel oil when mixed at room temperature (during summer) was found to be completely miscible. It means that the aniline point of the diesel is _______________ the room temperature?
A. More than
B. Less than
C. Same as
D. Either more or less; depends on the room temperature - Pour point and freezing point is equal for__________________?
A. Petrol
B. Diesel
C. Water
D. Crude petroleum - Smoke volatility index is equal to smoke point plus______________________?
A. 0.42 × (% distilled at 204°C)
B. 5 mm
C. 0.84 × (% distilled at 204°C)
D. 10 mm approximately - Most commonly used crude heater before the fractionation tower in a refinery is the ______________ heater?
A. Electric immersion
B. Pipestill
C. Steam coil
D. None of these - The most widely used crude topping column in refineries is the ______________ column?
A. Bubble-cap
B. Packed bed
C. Fluidised bed
D. Perforated plate - Flash point of atmospheric distillation residue is determined by ______________ apparatus?
A. Pensky-Martens (closed cup type)
B. Abel
C. Cleveland (open cup type)
D. None of these - Thermofor catalytic cracking process is a ______________ process?
A. Fixed bed
B. Moving bed
C. Fluidised bed
D. Non-catalytic - Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about ______________ kg/cm2?
A. 1.5
B. 3
C. 6
D. 12 - Hydrogen content in petroleum products varies from 12 to 15% (by weight). As a result the difference between gross and net heating value of petroleum fuels varies in the range of ______________ kcal/kg?
A. 600-750
B. 250-350
C. 1000-1500
D. 2000-2500
