Rittinger’s crushing law states that_____________________?

Related Mcqs:

1. For crushing of solids, the Rittinger’s law states that the work required for crushing is proportional to __________________?

   A. The new surface created
   B. The size reduction ratio
   C. The change in volume due to crushing
   D. None of these

2. General crushing equation is given by d(P/m) = -K (dD̅ S/D̅ n S). Bond’s crushing law is obtained by solving this equation for n = _____________ and feed of infinite size?

   A. 1
   B. 1.5
   C. 2
   D. 2.5

3. The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond’s law, Rittinger’s law and Kick’s law) depend upon the_________________?

   A. Feed material
   B. Type of crushing machine
   C. Both A. & B.
   D. Neither A. nor B.

4. In a size reduction crushing operation, feed size is 300 to 1500 mm while the product size is 100 to 300 mm. This is a case of the ________________ crushing?

   A. Secondary
   B. Fine
   C. Primary
   D. Ultrafine

5. In a size reduction crushing operation, feed size is 100 to 300 mm. while the product size is 10 to 50 mm. This is a case of the _____________ crushing?

   A. Primary
   B. Secondary
   C. Fine
   D. Ultrafine

6. In a size reduction crushing operation, the feed size is 10 to 50 mm, while the product size is 2 to 10 mm. This is a case of _______________ crushing?

   A. Primary
   B. Secondary
   C. Fine
   D. Ultrafine

7. What is the usual value of angle of nip for crushing of ordinary rock in smooth steel crushing rolls?

   A. 16°
   B. 32°
   C. 40°
   D. 46°

8. Which of the following equations is Rittinger’s crushing law? (Where P = power required by the machine, m = feed rate, k = a constant, D̅ sa & D̅ sb = volume surface mean diameter of feed & product respectively) ?

   A. P/m = K/ √Dp
   B. P/m = K . ln D̅ sa/D̅ sb
   C. P/m = K . (1/ D̅ sb – 1/D̅ sa)
   D. None of these

9. According to Bond crushing law, the work required to form particle of size ‘D’ from very large feed is (where (S/V)p and (S/V)f are surface to volume ratio of the product and feed respectively) ?

   A. (S/V)p
   B. √(S/V)p
   C. (S/V)2p
   D. (S/V)f

10. The work index in Bond’s law for crushing of solids has the following dimensions__________________?

    A. No units (dimensionless)
    B. kWh/ton
    C. kW/ton
    D. kWh.m1/2/ton