A. Open sand
B. Plate and frame
C. Vacuum leaf
D. Sparkler
Related Mcqs:
- The basic filtration equation is given as dt/dV = (μ/A ΔP). [(α .CV/A) + Rm], where, V is volume of the filtrate; A is the filtration area, a is specific cake resistance, μ is viscosity of the filtrate, and C is the concentration of the solids in the feed slurry. In a 20 minutes constant rate filtration, 5 m3 of filtrate was obtained. If this is followed by a constant pressure filtration, how much more time in minutes, it will take for another 5 m3 of filtrate to be produced? Neglect filter medium resistance, Rm; assume incompressible cake ?
A. 10
B. 20
C. 25
D. 30 - Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is_______________?
A. Added to the feed slurry
B. Pre-coated on the filter medium prior to filtration
C. Separated from the cake by dissolving solids or by burning it off
D. All A, B. & C. - In a ball mill, the volume occupied by the balls (when the mill is stopped) is about _______________ percent of the volume of the mill?
A. 35
B. 50
C. 70
D. 85 - The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant ______________ filtration?
A. Rate
B. Pressure
C. Both A. & B.
D. Neither A. nor B. - Addition of filter aid to the slurry before filtration is done to _______________ of the cake?
A. Increase the porosity
B. Increase the compressibility co-efficient
C. Decrease the porosity
D. Decrease the compressibility co-efficient - Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a _______________ surface?
A. Plane
B. Curved
C. Ribbed
D. Either A. or B. - Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the _____________ filtration?
A. Constant rate
B. Varying pressure
C. Varying rate
D. Constant pressure - A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is ___________________?
A. ½w2 . R2 . ρL
B. ½w2 . δ2 . ρL
C. ½w2 . δρL (2R + δ)
D. ½w2 . R . ρL(R + 2δ) - The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the _____________ filter?
A. Vacuum
B. Sand
C. Plate & frame
D. Rotary - For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the ______________ filter?
A. Plate & frame
B. Shell & leaf
C. Sand
D. Rotary vacuum
