Related Mcqs:

1. The basic filtration equation is given as dt/dV = (μ/A ΔP). [(α .CV/A) + Rm], where, V is volume of the filtrate; A is the filtration area, a is specific cake resistance, μ is viscosity of the filtrate, and C is the concentration of the solids in the feed slurry. In a 20 minutes constant rate filtration, 5 m3 of filtrate was obtained. If this is followed by a constant pressure filtration, how much more time in minutes, it will take for another 5 m3 of filtrate to be produced? Neglect filter medium resistance, Rm; assume incompressible cake ?

   A. 10
   B. 20
   C. 25
   D. 30

2. Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is_______________?

   A. Added to the feed slurry
   B. Pre-coated on the filter medium prior to filtration
   C. Separated from the cake by dissolving solids or by burning it off
   D. All A, B. & C.

3. Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) ?

   A. S
   B. 1/R
   C. 1/μ
   D. All A., B. & C.

4. The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant ______________ filtration?

   A. Rate
   B. Pressure
   C. Both A. & B.
   D. Neither A. nor B.

5. Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a _______________ surface?

   A. Plane
   B. Curved
   C. Ribbed
   D. Either A. or B.

6. Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the _____________ filtration?

   A. Constant rate
   B. Varying pressure
   C. Varying rate
   D. Constant pressure

7. A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The initial pressure drop during filtration is ___________________?

   A. ½w2 . R2 . ρL
   B. ½w2 . δ2 . ρL
   C. ½w2 . δρL (2R + δ)
   D. ½w2 . R . ρL(R + 2δ)

8. Filtration of water in a paper mill is done by a/an _______________ filter?

   A. Open sand
   B. Plate and frame
   C. Vacuum leaf
   D. Sparkler

9. Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc) is proportional to ____________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance)?

   A. √μ
   B. 1/√μ
   C. 1/μ
   D. 1/μ2

10. In filtration, the use of ‘filter aid’ helps in__________________?

    A. Reducing the filtration pressure
    B. Accelerating the rate of filtration
    C. Deplugging the filter medium
    D. Enhancing the cake porosity in case of a dense impermeable cake