Capacity (in tons/hr) of jaw/gyratory crusher is equal to (where, L = length of the receiving opening, cm S = greater width of the discharge opening, cm) ?

Related Mcqs:

1. As per Taggart’s formula, the capacity (kg/hr) of Jaw & Gyratory crushers (for gapes of 10 to 60 cms) is equal to (where, L = Length of feed opening, cms S = Maximum width of discharge opening, cms) ?

   A. LS
   B. 93 LS
   C. 250 LS
   D. √(LS)

2. The capacity of a gyratory crusher is ______________ that of a jaw crusher with the same gape, handling the same feed & for the same product size range.?

   A. Same as
   B. 2.5 times
   C. 5 times
   D. 10 times

3. According to Taggart’s rule for selecting between a gyratory crusher and a jaw crusher; the later should be used, if the hourly tonnage to be crushed divided by the square of the gape expressed in cm is less than_______________?

   A. 0.00184
   B. 0.0184
   C. 0.184
   D. 1.84

4. Which of the following crushers can be considered as a combination of a jaw crusher and a roller crusher ?

   A. Rod mill
   B. Fluid energy mill
   C. Gyratory crusher
   D. Ball mill

5. The material is crushed in a gyratory crusher by the action of__________________?

   A. Impact
   B. Compression
   C. Attrition
   D. Cutting

6. Gyratory crushers compared to the reciprocating jaw crushers__________________?

   A. Have greater capacity per unit of discharge area
   B. Crush intermittently
   C. Are less suitable for coarse materials
   D. Have less steady power consumption

7. Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m) ?

   A. 3.6 V.W.Dr.ρ
   B. 3.6 V.W. ρ
   C. 3.6 W.Dr.ρ
   D. 3.6 V.W.Dr/ρ

8. Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3) ?

   A. 3.6 W.D.V.ρ
   B. 3.6 W.D.V
   C. 3.6 W.V.ρ
   D. 3.6 D.V.ρ

9. Which of the following is not a part of the Blake jaw crusher ?

   A. Hanger
   B. Check plates
   C. Toggles
   D. Pitman

10. Choke crushing (in case of a Jaw crusher) compared to free crushing__________________?

    A. Results in increased capacity
    B. Consumes less power
    C. Consumes more power
    D. Both A. and C.