A. The strong base and strong acid reacts completely
B. The salt formed does not hydrolyse
C. Only OH- and H+ ions react in every case
D. The strong base and strong acid reacts in aqueous solution
Related Mcqs:
- Heat of neutralisation of HCl and NaOH is – 57.46 kJ/Kg mole. The heat of ionisation of water will be _____________ kJ/Kg mole?
A. 57.46
B. -57.46
C. 114.92
D. -28.73 - The accumulation in a steady state combustion process, burning 1 kg mole of carbon with 1 kg mole of oxygen thereby producing 1 kg mole of carbon dioxide, is _____________ kg mole?
A. 1
B. 0
C. 16
D. 44 - In which of the following case of mixing of a strong acid with strong base (each of 1N concentration), temperature increase will be the highest ?
A. 30 c.c acid and 30 c.c base
B. 20 c.c acid and 25 c.c base
C. 15 c.c acid and 35 c.c base
D. 35 c.c acid and 15 c.c base - The combustion equations of carbon and carbon monoxide are as follows: C + O2 = CO2, ΔH = – 394 kJ/kg .mole CO + ½ O2 = CO2, ΔH = – 284.5 kJ/kg. mole. The heat of formation of CO is _____________ kJ/kg. mole?
A. -109.5
B. +109.5
C. +180
D. +100 - A rigid vessel containing three moles of nitrogen gas at 30°C is heated to 250°C. Assume the average capacities of nitrogen to be Cp = 29.1 J/mole.°C and, Cv = 20.8 J/mole.°C. The heat required, neglecting the heat capacity of the vessel, is__________________?
A. 13728 J
B. 19206 J
C. 4576 J
D. 12712 J - Heat capacity of air can be approximately expressed as, Cp = 26.693 + 7.365 x10-3 T, where, Cp is in J/mole.K and T is in K. The heat given off by 1 mole of air when cooled at atmospheric pressure from 500°C to – 100°C is ____________________?
A. 10.73 kJ
B. 16.15 kJ
C. 18.11 kJ
D. 18.33 kJ - A very dilute solution is prepared by dissolving ‘x1’ mole of solute in ‘x2’ mole of a solvent. The mole fraction of solute is approximately equal to_________________?
A. x1/x2
B. x2/x1
C. 1 – (x1/x2)
D. 1/x2 - A fluid gas produced on burning furnace oil contains 0.15 gm mole of CO2, 0.05 gm mole of oxygen and 0.80 gm mole of N2. What is its molecular weight ?
A. 28.6
B. 30.0
C. 30.6
D. 32.6 - A butane isomerisation process produces 70 k.mole/hr of pure iso-butane. A purge stream removed continuously, contains 85% n-butane and 15% impurity (mole%). The feed stream is n-butane containing 1% impurity (mole%). The flow rate of the purge stream will be_________________?
A. 3 kmole/hr
B. 4 kmole/hr
C. 5 kmole/hr
D. 6 kmole/hr - One mole of methane undergoes complete combustion in a stoichiometric amount of air. The reaction proceeds as CH4 + 2O2 → CO2 + 2H2O. Both the reactants and products are in gas phase. ΔH°298 = – 730 kJ/mole of methane. Mole fraction of water vapour in the product gases is about_____________________?
A. 0.19
B. 0.33
C. 0.40
D. 0.67
Advertisement