A rigid vessel containing three moles of nitrogen gas at 30°C is heated to 250°C. Assume the average capacities of nitrogen to be Cp = 29.1 J/mole.°C and, Cv = 20.8 J/mole.°C. The heat required, neglecting the heat capacity of the vessel, is__________________?

Related Mcqs:

1. The ratio of existing moles of vapor per mole of vapor free gas to the moles of vapor that would be present per mole of vapor free gas, if the mixture were saturated at the existing temperature & pressure, is termed as the_____________________?

   A. Relative humidity
   B. Relative saturation
   C. Percentage saturation
   D. None of these

2. The accumulation in a steady state combustion process, burning 1 kg mole of carbon with 1 kg mole of oxygen thereby producing 1 kg mole of carbon dioxide, is _____________ kg mole?

   A. 1
   B. 0
   C. 16
   D. 44

3. Heat capacity of air can be approximately expressed as, Cp = 26.693 + 7.365 x10-3 T, where, Cp is in J/mole.K and T is in K. The heat given off by 1 mole of air when cooled at atmospheric pressure from 500°C to – 100°C is ____________________?

   A. 10.73 kJ
   B. 16.15 kJ
   C. 18.11 kJ
   D. 18.33 kJ

4. A car tyre of volume 0.057 m3 is inflated to 300 kPa at 300 K. After the car is driven for 10 hours, the pressure in the tyre increases to 330 kPa. Assume air is an ideal gas and Cv for air is 21 J/mole.K. The change in the internal energy of air in the tyre in J/mole is__________________?

   A. 380
   B. 630
   C. 760
   D. 880

5. The vapor pressures of benzene and toluene are 3 and 4/3 atmospheres respectively. A liquid feed of 0.4 moles of benzene and 0.6 moles of toluene is vaporised. Assuming that the products are in equilibrium, the vapor phase mole fraction of benzene is_________________?

   A. 0.4
   B. 0.6
   C. 0.8
   D. 0.2

6. The combustion equations of carbon and carbon monoxide are as follows: C + O2 = CO2, ΔH = – 394 kJ/kg .mole CO + ½ O2 = CO2, ΔH = – 284.5 kJ/kg. mole. The heat of formation of CO is _____________ kJ/kg. mole?

   A. -109.5
   B. +109.5
   C. +180
   D. +100

7. A fluid gas produced on burning furnace oil contains 0.15 gm mole of CO2, 0.05 gm mole of oxygen and 0.80 gm mole of N2. What is its molecular weight ?

   A. 28.6
   B. 30.0
   C. 30.6
   D. 32.6

8. One mole of methane undergoes complete combustion in a stoichiometric amount of air. The reaction proceeds as CH4 + 2O2 → CO2 + 2H2O. Both the reactants and products are in gas phase. ΔH°298 = – 730 kJ/mole of methane. Mole fraction of water vapour in the product gases is about_____________________?

   A. 0.19
   B. 0.33
   C. 0.40
   D. 0.67

9. “The heat capacity of a solid compound is approximately equal to the sum of the heat capacities of the constituent elements.” This is the statement of___________________?

   A. Law of Petit and Dulong
   B. Kopp’s rule
   C. Nernst heat theorem
   D. Trouton’s rule

10. FeO (s) + CO (g) = Fe (s) + CO2 (g), k = 0. 435 at 1173E; at equilibrium, what will be the number of moles of CO gas required to reduce one mole of FeO at 1173 K ?

    A. 1.0
    B. 1.3
    C. 2.3
    D. 3.3