In case of laminar flow of fluid through a circular pipe, the__________________?

A. Shear stress over the cross-section is proportional to the distance from the surface of the pipe
B. Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the
volume of circumscribing cylinder
C. Velocity profile varies hyperbolically and the shear stress remains constant over the crosssection
D. Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Related Mcqs:

Bernoulli’s equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli’s equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is steady. C. Fluid flow is uniform & turbulent. D. Fluid is compressible. E. Fluid is incompressible ?
A. A, C, D
B. B, D, E
C. A, B, E
D. A, D, E
For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) ?
A. μ
B. 1/μ
C. √μ
D. 1/√μ
The pressure drop per unit length of pipe incurred by a fluid ‘X’ flowing through pipe is Δp. If another fluid ‘Y’ having both the specific gravity & density just double of that of fluid ‘X’, flows through the same pipe at the same flow rate/average velocity, then the pressure drop in this case will be__________________?
A. Δp
B. 2Δp
C. Δp2
D. Δp/2
The ratio of average fluid velocity to the maximum velocity in case of laminar flow of a Newtonian fluid in a circular pipe is_____________________?
A. 0.5
B. 1
C. 2
D. 0.66
For laminar flow of Newtonian fluid in a circular pipe, the velocity distribution is a function of the distance ‘d’ measured from the centre line of the pipe, and it follows a ______________ relationship?
A. Logarithmic
B. Parabolic
C. Hyperbolic
D. Linear
For the laminar flow of a fluid in a circular pipe of radius R, the Hagen-Poisseule equation predicts the volumetric flow rate to be proportional to____________________?
A. R
B. R2
C. R4
D. R0.5
The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of _____________ fluid?
A. Dilatent
B. Pseudo-plastic
C. Bingham plastic
D. Newtonian
The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for ______________ fluid?
A. Newtonian
B. Dilatant
C. Pseudo-plastic
D. Non-Newtonian
The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for ____________ fluid?
A. Newtonian
B. Pseudo-plastic
C. Dilatent
D. Bingham plastic
The velocity profile exhibited by laminar flow of Newtonian fluids is such that the velocity distribution w.r.t. radius of the circular pipe is a/an ______________ with the apex at the centre line of the pipe?
A. Hyperbola
B. Parabola
C. Semi-circle
D. Semi-ellipse